Pale Blue Chalk Spray

Pale Blue Chalk Spray


Made to create. Our premium mineral paints provide excellent coverage, lightfastness, and porosity and give you a matte finish. You can paint on most surfaces, all without sanding or priming, or layer with any product in the Tommy Art DIY System.

Clean and prepare your surface before spraying. Shake well for 60-90 seconds. For best results, the paint’s temperature should be approx. 68°F (20°C). Test your spray paint on a cloth or piece of scrap material to ensure the valve is set correctly. Spray your surface in a uniform motion or with short bursts at a distance of approx. 10 inches. To avoid dripping, apply multiple thin coats allowing the paint to cure in between each coat. After use, clean the valve by holding the can upside down and spraying for a few seconds.

Pressurized container. Use only in a well-ventilated area. If product gets in eyes rinse continuously with water for several minutes. If contacts are present, remove lenses. Continue rinsing. If medical advice is needed, have product container or label on hand.

Add To Cart